C550 AMPHIBIOUS MACHINE
The Conver C550 is a robust multi-functional amphibious tool carrier for maintenance on land and water. This amphibious machine is super flexible and suitable for all kinds of mowing, dredging, retaining wall work and much more.
The operator’s space is mounted on the rotating mast set so that the operator turns with the tool, similar to an excavator, and thus always retains visibility of the work. The operator’s area is hinged so it can be lifted out of the hull. This provides ease of access to components below deck for service purposes.
The machine can drive itself out of the water on to embankments of up to 30°.
|HULL (L x W x H)||4.0 x 2.2 x 1.5 m|
|WEIGHT||4,550 kg 4.550 kg, excl. attachment|
|DRAFT||1,1m at 4.550 kg|
|GROUND PRESSURE||150 – 200 gr/cm2 at 4.550 kg|
|MAX. INCLINATION||30° longitudinal, 20° transverse (max. continuous working angle 15°)|
|ENGINE||Watercooled, diesel, 68 hp|
|EMISSION CLASS||Complies with local requirments|
|TRACK DRIVE||2x 450mm rubber tracks, positive drive|
|PROPULSION SYSTEM||Single 400mm tiltable and 0,4m height adjustable anti-coiling auger|
|PUMPS||Double LS-pump for tracks, auger and attachments, single gear wheel pump for the hydraulic cylinders|
|VALVES||Danfoss PVG 32 proportional|
|FUEL TANK||Diesel, 2 x 60 L|
|HYDRAULIC TANK||195 L, suction- and return filtration, oil cooler in return line|
|ARMS||1,8m + 1,2m, CW05 Q/R coupling|
|SLEWING ANGLE||Arm set and operator console over ca. 200 degrees|
|PROVISIONAL OIL FLOW||110 l/min @ 200bar, proportional|